How to insulate your water pipes?

The issue of plumbing (Αποφράξεις Καλλιθέα) water pipe insulation is particularly important among suburban property owners. Often in summer cottages and villages, the owners themselves have to worry about many elements of a comfortable stay.

Especially when it comes to homes / cottages with a living room all year round – you can not do without insulation of communications. And first of all, it is necessary to choose and install a heater for water pipes – without water, as it usually flows from a tap, it is difficult to enjoy the pleasures of suburban life.

In our material we will explain why it is worth insulating the water supply and what to look out for when choosing a material for thermal insulation.

Do I have to insulate the water supply?

Often the question of whether it is necessary to insulate the water supply occurs on a frosty morning, when it is already too late – tap water does not flow. In this case the homeowner has no doubt about the need for this event.

Indeed, pipe insulation is not always necessary. It all depends on the location of the house, the climatic conditions, the residence time of the residents and the characteristics of the utilities.

If the family members come to rest only in the warm season, then no insulation is needed. To avoid accidental rupture of pipes due to icy water in cold weather, when no one is in the cottage, you just need to properly maintain the system, preparing it well for the winter.

Does not require insulation and water, stretched to a sufficient depth. According to the rules, water pipes must be properly installed at the following depth: 0.5 meters + depth of soil freezing in a specific area. This is an important condition that must be met so that you do not have to do everything again after the first winter.

Residents of the northern areas have a freezing level of 2.5 m or more. This greatly complicates the process of deepening the pipeline to the desired level. Yes, and such an event will be expensive. Here you can not do without warming up.

It happens that there is no way to create a trench of the required depth for the installation of water pipes. In such cases, insulation is necessary. Another point is the entrance of the water pipe in the house. This plot in cold weather often receives increased attention from many homeowners. Therefore, you must take care of the insulation in time by choosing the right material.

Another place to remember about the pipeline is the entrance of the pipe to the well / well. It all depends on the characteristics of a particular water supply system and the layout of this site. If it is a well and the pipe is immersed in it, then we must not forget about its insulation, choosing a material resistant to ultraviolet rays and subsidence.

Water pipe insulation methods

To prevent frost from damaging the water pipes in a private home / cottage, you need to worry about their thermal insulation in advance.

It is important, even at the communication stage, to consider the insulation options of pipes and not just water pipes. If this is done in time, then the cost will be minimal.

Among the methods of heating a pipe to supply water to a house among homeowners, the most popular are:

  1. extend the duct 0.5 m below the freezer level.
  2. use a heating cable.
  3. insulate with insulating material.
  4. provides a vacuum.
  5. buy a finished factory pipe.
  6. apply several methods at once.

Most of the time, more than one method is used. Thus, if the water pipes are deep, then the area responsible for entering the house must be insulated. Therefore, the best option is chosen to ensure the local water supply system.

The heating cable is widespread due to the simplicity of installation and high quality performance of the functions assigned to it.

Depending on the type of installation, there are 2 types of cables:

  • outdoors
  • internal.

The first is placed at the top of the water pipe and the second is inside. It is securely insulated and made of safe materials. It is connected via a thermal shrink sleeve with a conventional cable with a plug or with the machine. Read more about the heating cable for water supply further.

There are many thermal insulation materials on the market. They all differ in their properties, quality, price, installation difficulties and lifespan.

Which one to choose depends on the specific situation.

An air gap method is also often used. It is a water pipe mounted on a cheap smooth plastic or larger diameter corrugated pipe.

Inside, there is free space for hot air to enter from the insulated basement or otherwise heated.

Another option is to buy ready-made insulated pipes of factory origin. Sold fully ready for installation.

They are 2 pipes of different diameters, placed next to each other. Between them there is a layer of insulation. This method of insulation is often called pre-insulation.

The use of many pipe insulation methods is due to the fact that all methods are imperfect and it will not be possible to apply them in all cases. The conditions of use in different households located in all parts of the country are radically different from each other. Therefore, to choose an option that is suitable for specific requirements.

Insulation alternatives

There are alternative methods of thermal insulation that prevent the occurrence of adverse effects. They do not apply in all cases. First, you can remove all the water from the system – no water, no problem. This method applies to houses that are not used in winter. It will help protect the system from damage in case of frozen water pipe.

Second, you can ensure the constant movement of water in the pipe by opening a small tap. This is not difficult to do with permanent residence. But the choice is dangerous – suddenly you have to leave the house for a few days and on the way back there will be a surprise in the form of a damaged water supply.

In addition to the tap hose, it is possible to provide constant pressure to the duct in other ways. For example, use a special water pressure booster pump in the system or add another element – the receiver. It must be cut in the pipe immediately near the pump. The receiver will maintain a constant pressure, which will protect the system from freezing.

See more about plumbing services:

How to get rid of cesspool smell at home?

How to get rid of cesspool smell at home?

Smelly odour in the home is a common problem in households, especially in the summer. Very often the problem occurs to such an extent that it does not allow you to relax in your own home! Αποφράξεις Αργυρούποληcan help you with any problems you face at home!

More specifically, the most common spots where the smell of a septic tank is most pronounced in the house are the floor siphons and the bath siphons.

Also, the unpleasant odour is observed in cases where the house is hermetically sealed with watertight frames and all air circulation takes place through the sewerage network.
Smell of dirt in the house? See how to get rid of it immediately!

The solution you can try exclusively with home-made ingredients is the following:

  • First let the bathroom faucet run to clean the bathroom siphon well.
  • Then you can pour 1 cup of vinegar into the floor siphon
  • Leave it on overnight without using the bathroom and shower faucets.

Vinegar, due to its acidic nature is the best cleaner for these cases, but also one of the most intense home-made disinfectants!

In case the bad smell has not completely disappeared, you can try the corresponding alternative which is lemon!

  • Mix 1 cup of lemon juice and 1 cup of boiling water and pour the mixture into the siphon.
  • Let the mixture work all night and enjoy a home without odours the next morning!

Finally, if the problem starts with the basin and its connection to the sewer, you can add 1 cup of soda. Let it work all night for unique results!

Smell of cesspool at home! What to do if the strong smell persists?

In any case, no matter how hard you try, the stench persists, so it’s best to stop trying. Call an experienced plumber, as the cause may be a blockage in the piping.

The professional approach to plumbing usually involves checking for the risk of sewer blockage. It also controls the possibility of installing a computer in the last well before the pit.

Installing a computer will help to properly ventilate the sewer and effectively remove the smell of sewage in the home.

Also, professional sewer cleaning is a definitive solution to remove unpleasant odours from your home!

Now you can remove the strong smell of septic tank from your home! In case the smell persists, you should contact a specialized plumber, because the problem is probably somewhere else!

What can you do if the pit fills up quickly?

Lately, you have noticed that the cesspool is filling up faster than before. What is the cause of the problem and what is the appropriate solution?

The cesspool fills up quickly – What is the reason?

Initially, the septic tank is a septic tank in which waste is disintegrated and water is absorbed from the soil. But why does the septic tank fill up so quickly?

Many absorbent septic tanks lose their absorbency over time. The reason; Purple concentrations in the walls of the septic tank seal it, reducing its absorbency and filling it quickly.

Frequent vacuum discharges cause disturbance and odour in the area. This problem is getting worse as time goes on and the solution must be effective!

What methods can you use to deal with the problem?

There are many ways to deal with a rush that fills up quickly. Below we have gathered the basic methods, so that you can find the one that best suits your space.

Use of organic or chemical liquid

This method is simple, but needs to be applied frequently to the plumbing to solve the problem.

You apply a chemical or biological liquid that removes the cigar from the walls and bottom of the filled pit, while partially restoring its absorbency.

The cleaning of the septic tank is done by the fermentation caused by the preparations in the waste, at the same time reducing the odour.

The total cost depends on the absorbency and age of the cesspool.

This method is the most economical and the most immediate in dealing with the problem, but with frequent use of the preparations every few months.

Sewer cleaning and maintenance

With proper and professional sewer maintenance at regular intervals, the cigar will not be able to accumulate on the walls of the septic tank and so its operation will be effective in the long run, without problems.

Waterproofing of the pit

With this solution, the cesspool will not be filled with rainwater. So it will not be filled with water even when the aquifer rises due to the weather.

For this method to work, you must first do a professional cleaning of the septic tank and then reinforce it with special concrete.

The cost is high and depends mainly on the size of the septic tank, but the results are permanent.

Conversion of the cesspool into a biological wastewater treatment plant

This solution is the most expensive, but you will never need to repair a septic tank again!

By converting a septic tank into an organic one, the odour and the possibility of calling a tank for emptying the septic tank effectively disappear.

The same goes for chemical and biological preparations, which you will not need to use again!

Its cost depends on the number of people who will use it, while the water produced can be used for subsoil watering.

The options are many, but only one will be perfect for you!

To see what suits your case and pocket, you will need the advice of a reliable and experienced professional! At Apofraxeis Argyroupoli, the professionals who specialize in emptying and converting the septic tank, can give you the ideal solution to your problem!

Read more about sewer cleaning: