Basic plumbing repairs you need to do

Plumbing repairs are much more than clearing clogged toilets and tightening bolts on leaky sinks according to Αποφράξεις Αντωνίου.

Plumbers are tradesmen who specialize in the installation and repair of sewers, drains and other water systems. They protect us from the mess that comes with neglected pipes and plumbing fixtures by properly diagnosing and repairing faults.

While we usually contact a plumber about a garbage disposal that won’t work or a flooded basement, technicians are often able to detect damaged water lines and gas leaks.

A soggy texture on the walls or ceilings of your home, or even a musty, damp smell can be a sign that you need to contact a local plumber.

1. Fix low water pressure

Low water pressure is an annoying issue that makes all jobs difficult. Refilling a glass of water takes much longer than it should. You have the nagging feeling that the water from your weak shower isn’t doing enough to get you clean. If you suffer from low water pressure, washing your own car is probably out of the question as well.

There are several actions a plumber can take in response to low water pressure. The first step is to determine the cause. It could be a pressure regulator, pipe failure, excessive demand on the water supply, debris in pipes or even closed water valves.

Plumbing repair companies offer a variety of solutions, such as installing water pressure boosters that increase the power of water as it travels from the main line into the home.

Plumbers may be able to release air blockages and mineral buildup from all pipes in the building to clear the path to the water heater.

2. Reduce your water bill

Unless you’ve had a relatively new plumbing system installed in your home, you’re probably missing out on many of the modern water-saving features built into new plumbing fixtures.

And wasting water is wasting money. Investing in plumbing repairs and upgrades can pay off when you consider the amount of money you’ll save by conserving water.

Plumbers can help homeowners control their water bills and better affect the environment we all live in.

Plumbing repairs that specifically lower water consumption include cleaning aerators, insulating hot water lines and maintaining water heaters. It might even be worth considering upgrading to a tankless water heater, which will save you even more money in the long run.

3. Clean the drains

Drainage problems start out as minor inconveniences, but if left unattended, they will wreak havoc on any home or commercial establishment. Sewer, kitchen and bathroom drains are generally clogged with hair and soap build-up, which can lead to expensive plumbing repairs.

Some plumbing service companies serve by ensuring flood-free homes, neat workplaces from start to finish, and professional use of trenchless plumbing repair methods when cleaning drains.

Most technicians also have experience with garbage disposal and will be happy to give you advice on how to keep your bathroom and kitchen drains clear of blockages. Your local plumber may also recommend installing protection systems that prevent debris from entering the pipes.

4. Replace the old pipes

In addition to general plumbing repairs, most companies also offer full pipe renewal services. As pipes age, they become brittle and harder to repair. Once your pipes reach this condition, it is best to contact a plumbing repair specialist to replace them.

The downside to re-piping your home is that it can be expensive, depending on the type of pipes used and the size of the home. There are certain conditions under which it must be done.

Galvanized pipes, for example, a plumbing system installed in many homes built before 1960, are usually rusted and corroded on the inside from decades of exposure to water. Wear and tear on these pipes contributes to poor water pressure and contamination.

5. Install water filtration systems

As mentioned before, it’s easy to get your water supply system contaminated. Materials once thought to be safe, such as galvanized pipes, have now been shown to be harmful. Any number of problems could lead to cloudy or strange tasting tap water.

Plumbing repair specialists install and maintain water filtration systems to protect residents from contaminated water. These systems also solve the problem of hard water, which has a high concentration of sediment that builds up in your pipes over time and causes your water system to become inefficient and faulty.

6. Repair of running toilets

It may not be a known fact, but flushing toilets lose up to 200 gallons each day. This makes them both expensive and annoying. We are all familiar with the circular sound of water filling the tank, playing on repeat for hours.

Many of us go for months or even years without solving the problem. Sound becomes part of the background noise in our home. Plumbing repair experts encourage you to pay close attention to your toilet noises every day and check your water meter frequently to see if the amount of water being used is increasing.

See more about Αποφράξεις Αντωνίου:

How to insulate your water pipes?

The issue of plumbing (Αποφράξεις Καλλιθέα) water pipe insulation is particularly important among suburban property owners. Often in summer cottages and villages, the owners themselves have to worry about many elements of a comfortable stay.

Especially when it comes to homes / cottages with a living room all year round – you can not do without insulation of communications. And first of all, it is necessary to choose and install a heater for water pipes – without water, as it usually flows from a tap, it is difficult to enjoy the pleasures of suburban life.

In our material we will explain why it is worth insulating the water supply and what to look out for when choosing a material for thermal insulation.

Do I have to insulate the water supply?

Often the question of whether it is necessary to insulate the water supply occurs on a frosty morning, when it is already too late – tap water does not flow. In this case the homeowner has no doubt about the need for this event.

Indeed, pipe insulation is not always necessary. It all depends on the location of the house, the climatic conditions, the residence time of the residents and the characteristics of the utilities.

If the family members come to rest only in the warm season, then no insulation is needed. To avoid accidental rupture of pipes due to icy water in cold weather, when no one is in the cottage, you just need to properly maintain the system, preparing it well for the winter.

Does not require insulation and water, stretched to a sufficient depth. According to the rules, water pipes must be properly installed at the following depth: 0.5 meters + depth of soil freezing in a specific area. This is an important condition that must be met so that you do not have to do everything again after the first winter.

Residents of the northern areas have a freezing level of 2.5 m or more. This greatly complicates the process of deepening the pipeline to the desired level. Yes, and such an event will be expensive. Here you can not do without warming up.

It happens that there is no way to create a trench of the required depth for the installation of water pipes. In such cases, insulation is necessary. Another point is the entrance of the water pipe in the house. This plot in cold weather often receives increased attention from many homeowners. Therefore, you must take care of the insulation in time by choosing the right material.

Another place to remember about the pipeline is the entrance of the pipe to the well / well. It all depends on the characteristics of a particular water supply system and the layout of this site. If it is a well and the pipe is immersed in it, then we must not forget about its insulation, choosing a material resistant to ultraviolet rays and subsidence.

Water pipe insulation methods

To prevent frost from damaging the water pipes in a private home / cottage, you need to worry about their thermal insulation in advance.

It is important, even at the communication stage, to consider the insulation options of pipes and not just water pipes. If this is done in time, then the cost will be minimal.

Among the methods of heating a pipe to supply water to a house among homeowners, the most popular are:

  1. extend the duct 0.5 m below the freezer level.
  2. use a heating cable.
  3. insulate with insulating material.
  4. provides a vacuum.
  5. buy a finished factory pipe.
  6. apply several methods at once.

Most of the time, more than one method is used. Thus, if the water pipes are deep, then the area responsible for entering the house must be insulated. Therefore, the best option is chosen to ensure the local water supply system.

The heating cable is widespread due to the simplicity of installation and high quality performance of the functions assigned to it.

Depending on the type of installation, there are 2 types of cables:

  • outdoors
  • internal.

The first is placed at the top of the water pipe and the second is inside. It is securely insulated and made of safe materials. It is connected via a thermal shrink sleeve with a conventional cable with a plug or with the machine. Read more about the heating cable for water supply further.

There are many thermal insulation materials on the market. They all differ in their properties, quality, price, installation difficulties and lifespan.

Which one to choose depends on the specific situation.

An air gap method is also often used. It is a water pipe mounted on a cheap smooth plastic or larger diameter corrugated pipe.

Inside, there is free space for hot air to enter from the insulated basement or otherwise heated.

Another option is to buy ready-made insulated pipes of factory origin. Sold fully ready for installation.

They are 2 pipes of different diameters, placed next to each other. Between them there is a layer of insulation. This method of insulation is often called pre-insulation.

The use of many pipe insulation methods is due to the fact that all methods are imperfect and it will not be possible to apply them in all cases. The conditions of use in different households located in all parts of the country are radically different from each other. Therefore, to choose an option that is suitable for specific requirements.

Insulation alternatives

There are alternative methods of thermal insulation that prevent the occurrence of adverse effects. They do not apply in all cases. First, you can remove all the water from the system – no water, no problem. This method applies to houses that are not used in winter. It will help protect the system from damage in case of frozen water pipe.

Second, you can ensure the constant movement of water in the pipe by opening a small tap. This is not difficult to do with permanent residence. But the choice is dangerous – suddenly you have to leave the house for a few days and on the way back there will be a surprise in the form of a damaged water supply.

In addition to the tap hose, it is possible to provide constant pressure to the duct in other ways. For example, use a special water pressure booster pump in the system or add another element – the receiver. It must be cut in the pipe immediately near the pump. The receiver will maintain a constant pressure, which will protect the system from freezing.

See more about plumbing services:

How to properly install tiles in a roof

A tiled roof is a beautiful architectural proposal for your residence design.
It is no coincidence that for many centuries the tiled roof was one of the favorite choice of most people wanted to cover their roof.

The reason ofcourse is no other than its incomparable architectural beauty, but also the special advantages it can offer us.

Even in the big urban cities, in case we take a good look at the view from our balcony, we will definitely see a building that will be decorated with tiles. Surely this building is going to be the one among the uniform roofs of the apartment buildings.

The tiled roof is made using wooden base with the addition of sloping concrete.
We usually find them in houses, roofs, cottages, small buildings, pergolas and mainly in areas with high altitude.

The advantages of a tiled roof

  • Durability
  • Energy saving
  • Low maintenance costs
  • Ease of installation
  • Unburned
  • Weatherproof
  • Impressive insulating performance
  • Possibility of adaptation to all roofs
  • Variety of colors
  • Excellent aesthetics
  • The repair

Repairing a tiled roof

The repair of the roof needs, above all, good planning and of course a proper study by a specialized workshop.

Most of the older constructions have various roofing problems. Weather conditions, lack of insulation, lack of maintenance, earthquakes and many other things can cause damage to the tiles.

Replacement or welding of cracked or broken tiles is done with a strong repairing cement mortar which is then sealed with a spreadable cementitious sealant.

The construction of the tile roof

Proper construction of the tiled roof ensures durability for many years. The correct placement of the tiles is A and O.
There are different types of tiles that we can choose from. The most famous are ceramic tiles, plastics, and concrete.

Classic ceramic tiles stand out so much for their rich beauty that they force other types of tiles to imitate them, stealing a little of their glamor. In combination with their cheap cost, they are the No. 1 choice of most. The main disadvantage is the weight.

Plastic tiles are that closest in appearance to ceramics. This is a very charming choice made with polypropylene technology. The great lure they have is the written guarantee that we can find in the market. This plastic is a very light material, with great durability and very reliable. Their only minus is their slightly stingy price.

Concrete tiles are mainly recommended for areas with low temperatures. They are made of lightweight concrete, which makes them almost indestructible. At the minus is the high weight.

Of course there are other types such as asphalt. Asphalts are essentially tarpaulins cut in the shape of a tile. As their name implies, they are a completely waterproof material and in fact very cheap. Its disadvantage is the flat face.

Finally there are the tile panels. We can find them in various variations in quality, color and shape. Their biggest advantage is that they already have thermal insulation elements (polyurethane) and so no further infrastructure is necessary. The highest quality and most expensive panels are distinguished for their resistance to weather conditions and shocks.

In general, we can find several types of tiles. The most famous are:

  • Byzantine
  • Roman
  • Swedish
  • French
  • Mediterranean
  • Dutch
  • Artificial aging
  • Enameled

It is very important that the wood of the frame is of good quality and impregnated with insecticides. This way we will be sure not only of the solid construction but also of the prevention of insects and fungi.

One of the most important things in the construction of a tiled roof is the substrate.
A substrate can be continuous (skinned) or discontinuous.

Tile roofing membranes also play an important role. It is essentially the waterproofing of the tiled roof that they protect from water if it penetrates through the tiles. Depending on the case, of course, it is better to place them over the thermal insulation. We find them in two categories:

Asphalt membranes
Vapor permeable or breathable
It is also important to form a perimeter channel in the concrete so that the rainwater ends up there and not at the lower points of the tiled roof with the risk of being gradually destroyed.
One of the biggest advantages of tiled roofs is their thermal insulating properties. For this reason, tiled roofs provide a cooler home in summer and warmer in winter, thus saving money and energy from electricity and heating fuels.

Of course, in order to enjoy a complete thermal insulation effect, the appropriate thermal insulation is required. This way we effectively protect the wooden frame from moisture, thus increasing its lifespan.

Insulation of a tile roof

The insulation on the tiled roof has the effect of reducing its temperature by up to 50%. At the same time the internal temperature of the house is reduced by up to 25%.

There are generally several types of tile roof insulation systems.
Reflective Insulation

In the case of reflective insulation, we achieve complete thermal insulation of the surface. Thus heat does not penetrate into the building as 90% of the solar radiation is reflected.

The most well-known method is polyurethane spraying, thermal insulation paints and the use of thermal insulation boards.

During the process of the construction, thermal insulation boards of expanded or extruded polystyrene and generally this kind are installed. They must be placed very carefully between the frames to prevent the transfer of heat and cooling from the roof inside the house.

In another case, the tiles are sprayed with polyurethane spray with a special high pressure machine or with an extruded polystyrene coating.

Hope you have understand the basics of the roof tiling. Remember that it is not an easy process and you should always hire a pro. He will manage to properly install the tills.

Also he will be aware of the proper instructions that should be followed to apply the tills to be safe in their place and to be in a good shape for a long time .

See more areas Montclair Roofing serves:

Always fresh air in the roof attic

Always fresh air in the roof attic

Given the tightness of modern structures, there seem to be problems with the roof attic ventilation, resulting in the condensation of water vapor in the attic.

Water vapor is a phenomenon of everyday life that occurs as a result of cooking, washing, watering, washing, drying clothes, etc. Water vapor created in this way must definitely be drained from a vent.

The introduction of fresh air inside the roof attic can occur either by opening the window, or by a special vent located in the roofing window.

3 Different types of windows for the roof attic

  1. The automatic vent has a ventilation capacity of 52m3 / h (this value is without the air filter, with the filter 40m3 / h) at a pressure difference of 10 Pa, depending on its width window. The entry of air into the room is ensured by the automatic regulation of its flow, thus providing a healthy climate in the roof attic, saving heat and energy costs.
  2. The vent manually adjusts the efficient air flow. When fully open, entry allows 43m3 / h of fresh air (this value is without the air filter, with the filter 35m3 / h) at a pressure difference of 10 Pa, depending on the width of the window. Due to the increased efficiency, the humidity of the indoor air is significantly reduced, resulting in concentration limitation.
  3. The vent manually adjusts the air flow. When the inlet is fully open, allowing the flow of 9m3 / h fresh air at a pressure difference of 10pa.

More roofing advice

To reduce this effect the roof windows in the attic use a number of different vents.

The structure of the handle on the windows allows closing of three points that leave gaps for the entry of fresh air into the room.

A latch at the top of the attic window frame secures the window and allows fresh air to enter through the micro-opening into the roof attic.

Read more about Gikas Roofing in Montclair:

Tips for painting the exterior walls

Exterior wall painting

Painting the exterior walls of our house is an crucial investment for our property. This comes from the fact that it is a very important and technical work for its renewal and maintenance, a work that must be done every 5 to 10 years. By painting the exterior of our house, the property acquires the right aesthetics.

Also a high level of protection from the sunshine and humidity that harms it, but also durability over the periods. Especially in countries where most days of the year there is sunshine, the procedure of painting the exterior walls of a building or an apartment is necessary and imperative.

That way we can maintain the outer of the building in order to look beautiful and be in an excellent condition. Exterior painting has to do with all the exterior surfaces of our home or workplace. By this way we mean the plastered or the  concrete facades of the property, our balcony ceilings, the wooden or metal protective railings.

Also the exterior wooden or metal doors, wooden pergolas and the outer guardrails. Every exterior surface needs the right application and the appropriate products, if we want to achieve the ideal result that is going to aim the triptych: aesthetic superiority, ideal finish and duration in time.

The work of painting exterior walls

In order to have an excellent quality exterior painting, the key is the good cleaning of every surface that is gonna be painted, so we can apply the paint on a clean wall. There are four key pointers in moving your paint around:

1. check the plaster for it’s hollow
2. carefully check for any signs of moisture into the plaster
3. checking the wall forinflated colors
4. cleaning and properly prepare our surface to pass the first substrate, using the suitable material, emaning the primer.

Before you apply the paint, you should scrape and remove the hollow plasters and peels of older paints, to completely clean the wall.

If there is any deep corrosion on the surface, there is a chance that the removal of the loose materials may expose the bricks or iron bars. In a case like this, the damage is repaired and new plastering should be done, before we proceed to the procedure of oil painting.

If there is no deep corrosion, but only simple cracks and shallow holes, then we should plaster the spots when the damage is. This action is followed by the one of rubbing with a sander, just in order to remove the residues from the stucco,  until the moment we will have a wall that is clean and also free of dust or dirt.

After the process of cleaning and when all the surfaces are completely dry, then we apply the primer. This helps facilitates the application and ensures us a uniform surface in the final color. The substrate will bind with the paint and seal our final painting.

After priming, our walls is ready to accept the color of our choice. Remember that the choices of the materials also play an important role. We suggest you choose paints of good quality, that will ensure good adhesion and penetration with high elasticity and resistance to alkaline surfaces, achieving a very good bond with the substrate.

For the exterior walls, we suggest you to choose the silicone acrylic paint, the one that protects from moisture. However, depending always of your needs there are plenty other options .

Use of quality materials in exterior painting

Always remember that exterior paints are completely different from the paints we use for the interiors. Also, each material on the facade or the exterior walls needs a different type of paint.

In the case we want to paint over materials like wood, aluminum, or plastic and plaster, these building elements is having their own type of painting and their own materials for this action.

There are a big number of paints on the market especially for exterior walls, ones that protect them as they are not affected by the environment conditions, the temperature changes, the air pollutants and the sunlight.

An economical solution could be the acrylic water-based paint for outdoor use, that is is suitable for surfaces that we paint frequently. It can be applied to exterior walls, to cement boards and plaster. Even on cement surfaces, concrete ones and generally in places where the surfaces are alkaline .

In case that you want something more, especially the ones that the property is located in an area with humidity, emaning near the sea or into the green, you can use a silicone acrylic paint in the cost of an extra charge.

Silicone acrylic paints are always recommended for exterior walls, as this type of paint can prevent the accumulation of dust and dirt on our surface and allows the rain to wash them away, managing to keep the surface clean for quite a long time.

Additionally, the silicone acrylic paints will offer you excellent waterproofing. Due to the high water repellency they have, the penetration of the external moisture and also rainwater into the wall will be prevented. That’s something  offering you a long-term protection of the surface.

Also it allows the moisture that is trapped inside the surface of the walls to escape with great ease into the atmosphere. In this way we protect them against bloating and also peeling and molding.

The silicone acrylic paint will offer you an excellent performance and also ease of application, while giving you a uniform matte finish of high perspiration.

Exterior wall painting and weather

If we want to paint outdoor, the ideal weather conditions for this procedure are during a day with a relative cloudiness. One with moderate temperatures and also normal humidity conditions.

The right weather conditions can ensure us that the paint will dry properly and an end result that will be durable over periods. The calculation of the amount of color that we are going to need is approximate.

It is based on the performance of the product that we selected per liter and per  square meter. Remember that the calculation of each product concerns an application. Usually the substrates need one coat of application, but the final paints need two  coats.

We believe to have helped you with your outer walls painting. At first it may seem difficult but after a while you will see that it is something not to worry about.

If this is something that does not fits you, there is always the possibility of hiring a pro, to have the best results without the need of your personal efforts.

See more Gikas Painting areas:

Best color ideas for wall painting

If you are looking to make an ordinary room in your home look great, the easiest way to do this is by wall painting. The uniqueness that can be achieved by painting in a room is endless, as there are literally millions of color combinations that you can use.

Many of the ideas that follow are not only ideas for wall painting colors, but also ceiling, for curtains, furniture, carpets, flooring, and wallpaper for wall cladding. The colors are endless, and many of our ideas include pink, blue, green, lime, red, orange, black, yellow, brown and more. Ideas include designs, designs, for two colors and three colors. Take a look below at the different wall color ideas and get inspired. If you like a color or combination of colors you can look for at the wall painting palette.

Painting tip: Before you get the amount of paint you need to paint a room, it is a good idea to ask for a sample to see how it really looks on your wall. The volume of the surface and the lighting of the space can bring significant differences in how a color will show.

Basic properties and effects of colors

It is true that you will find many articles and tips on the effect of colors, what your tastes reveal about your personality and other such fun.

Unfortunately, this perspective often causes us to become overwhelmed when it’s time to start a wall painting project.

It is the least, naive for example, to talk about the color green in general, you are clean and we have only one choice, while in a single colored fan we will find at least 200 shades of it!

For this reason, when friends and acquaintances often ask Gikas Painting what would suit their space, they answer that if they do not study a space and take into account all the parameters, they will never suggest something on foot.

For the exact same reason, all I can do in an article is give some general instructions. In no case are these proposals for a professional space painting, where many more factors must be considered.

The warm wall painting colors

It is a fact that bright yellow is the first color that the human eye detects in a space. That’s why most signs are yellow. So if you want to get attention, it is a good choice, you just have to keep in mind the following:

Yellow as well as orange are associated with cheap products. It is a color that illuminates a space and creates a happy mood, in the right shade and in small quantities. Otherwise, it is just as tedious as red.

  • Your anxiety, stress and impatience will intensify in a waiting room dominated by red, which has been associated with danger.
  • As red tones motivate us and make us more aggressive, it should be used with caution in areas where misunderstandings and quarrels can easily arise.
  • A lawyer who specializes in disputes and divorces should think hard about whether to include it in their color palette.

On the other hand, its capacity and incitement to move make it suitable for places with intense activity, such as a gym.

  • Keep in mind that bright red, yellow and orange on large surfaces are not only tiring for the eyes but tend to de-tune us.
  • In an area where we need to be focused for a long time doing mental work – such as study spaces, tutorials and offices – their use should be avoided or limited.

If you still want to liven up and warm a space, you can do it with shades that contain red, such as some shades of wood, but also purple-fuchsia shades.

  • The more earthy shades of warm colors like coffee are suitable to create the feeling of security and intimacy and promote communication.
  • The warm shades of red, orange, salmon and brown in combination with cream – beige, are ideal for restaurants and cafes.

It is known that these shades whet the appetite, since most foods have this color.

In fact, research shows that the colors of the dishes affect the taste of the dessert you eat, the coffee or the chocolate you drink.

The cool wall painting colors

In contrast, few foods are blue or lilac – so they do not predispose us to food.

So you will not feel warm and familiar, and you probably will not find particularly tasty the food in a restaurant dominated by metal, glass and exposed concrete as well as the cool shades of white, blue and cool purple combined with white lighting.

The same goes for gray and black, which is why restaurant and cafe areas dominated by these colors are likely to fail to retain their customers in the long run. Unfortunately, a wrong modern trend in my opinion, which shows the ignorance of the psychology of colors.

The color white may be associated with cleanliness and simplicity, but when it prevails in a space it creates feelings of coolness, literally and figuratively.

  • Blue, absolute white and some shades of gray belong to the cool colors. Green can be quite cold to warm, depending on its yellow or blue content.
  • Blue, green and turquoise are especially suitable for places where we want to calm down, relax and work together.

They are very suitable colors for health areas and generally for areas that we want to relax, because they alleviate anxiety – some claim that they reduce the feeling of pain. They are also ideal options for beauty salons, hairdressers and spas.

But be careful to combine them with warm shades of wood and not with cold whites and grays, to avoid an icy result – another common mistake I notice.

Combined with a pale warm and earthy shade, they create an ideal atmosphere for relaxation – think of a sunny beach.

Also, these 2 colors are the most favorite of men and women. They refer to water and nature in general, such as coffee to the earth, soil and plants.

  • Blue is associated with security and reliability, which is why you will find it in many company logos.
  • Green, again, has been linked to nature and ecology. If you want to emphasize your ecological awareness or emphasize that your products are natural, it is essential.

In general, the pale shades of cool colors indicate a larger space

There are, however, warm blues and greens and cool yellows and browns, depending on their content in other shades.

  • Purple for example, consisting of blue and red basically, can be quite warm if it contains enough red or tends to be cold if blue predominates.
  • Neutral shades are also necessary in a space, the absolute multicolor is tiring. But they must also be used correctly and without exaggeration.
  • Black as well as dark charcoal are imposing, they refer to expensive services (when it comes to products), but they must be used with caution, especially when dealing with small and not very bright areas.

They are suitable if you want to display something with bright colors, such as a painting, furniture or object, creating a theatrical atmosphere.

However, I would suggest avoiding black and dark gray on walls or large surfaces. Setting the customer up against a black or dark charcoal wall is not a very smart choice. You will make him feel sad and you certainly do not want to associate your space with negative emotions.

Unfortunately, we have seen this wall painting trend prevail in recent years, but it is completely wrong, for many reasons.

See more Gikas Painting areas:

10 Mistakes When Painting Your Home Alone!

10 Mistakes When Painting Your Home Alone!

Painting the house yourself may sound like a good idea but there are some tips that will help you get the result you are looking for. You do not need special knowledge and materials, just appetite, enough free time and good mood.

Painting the wall requires attention and depending on your experience you will do enough or a little time to finish. Anyway, remember that it is fun and extremely stressful, as long as you follow these ten simple tips that I mention below.

What to watch out for when painting the house yourself!

1. Not just a hand paint

Even if you paint the wall in the same or similar color that you had before you have to make at least two coats of paint for a beautiful and uniform result. For distant shades, three coats of paint may be needed.

2. You do not clean the surface

You have to thoroughly clean the surface from dust and hairs, because no one likes a wall or furniture with stuck hairs and rubbish on it, which you can not remove.

3. You do not apply primer

Primer is a thin material that must always precede the paint. Creates the appropriate insulation and prepares the wall so that it better accepts and retains the color on the wall.

4. Paint over holes without plastering

The paint on holes from nails and others, does not cover the hole. The best thing to do is to take a small box of putty and a spatula and plaster all the small holes before you start anything else.

5. Re-paint on a paint that has not dried

Always remember that one coat of paint must dry before you start the other. If you hurry, you will result in a wall that will not look uniform and well-painted.

6. You do not protect the plaster surfaces

Protect the plaster surfaces either on the ceiling or below because only then will the painting be a toy, without the persistent cleaning after which it bothers all the housewives.

7. You do not protect doors and furniture well

Gather all the furniture in the middle of the room. Put special nylon covers on furniture to protect them from painting. Also, do not miss the adhesive tape for the doors and all the furniture in which the paint can come in contact.

8. Skip the silicone to fill in the gaps

If you see that there are gaps between doors and wall, do not rush to use paint, because this will not help. Put silicone where there is a gap and then paint your wall.

9. You do not mix the color well

One thing many beginners do is not to mix the paint well, with the result that the first coat of paint differs from the second because some paint has settled to the bottom. Make sure your mixing is up to the bottom and for a long time.

10. You are not wearing all the necessary protective gear

Always try to wear gloves for your hands, and something in your hair, because it is almost certain that you will get them dirty. Your clothes should be the ones that will not bother you if they get dirty. Inhaling the paint for hours is not the best thing, so if it is summer, keep the windows open. For the winter, wear a protection that will help you not to inhale the substances.

Painting the house yourself is fun and takes time and willpower. If you like to do this kind of work, do not neglect it because you will definitely have a good time and the result will justify you.

Τhings you need to know before painting the walls white!

You may be wondering what color to paint your walls and have ended up in white. The truth is that no other color can offer you the elegance that white color offers you. Visually it is, if not the most beautiful, one of the most beautiful colors.

But you have to choose between many colors and the factors that you have to consider are many. Surely you are confused, like each of us, with the choices in front of you. Here are some things to know before you whitewash the walls.

Hue

The white colors with shades of blue and gray are clearer. On the other hand, when there is a shade of red or yellow they are softer and more relaxing. What is best for your home is a purely personal choice.

If your house is in a place where there is natural light then it is better to prefer shades of blue and gray. But if you are not in a place where the house is so light, it is better to choose a warmer color.

Always be prepared

White walls do not forgive mistakes. If the painting is not done properly, be sure that it will be visible. If there are stains that appear, use a primer before you start painting. Preparation is the key to getting a job done right.

Think lighting

In rooms with plenty of natural light, white paint can look different during the day. Try a sample of the color you want and see what it looks like in the morning, at noon and in the afternoon.

To illuminate low light areas, it is better to use a cooler shade of white that will reflect light from the luminaires in the room.

Combine color with space

Before choosing the color of the room, carefully examine the floor and the cabinets of the house. Make sure that the shade of white you choose matches the rest of the home decor.

Give color to the decoration

If you decorate your home or a room with only white colors, it is most likely to become boring. To avoid this, use a variety of colors on furniture, pillows, fabrics, rugs and decorations.

Find your favorite shade

Once you find your favorite shade of white, look in the companies to find the color you want exactly. The color and shades vary from company to company, so it takes a lot of searching to find what you are really looking for.

See more painting areas in Montclair:

What is a heating system circulator pump?

In a central heating installation, the water after being heated in the boiler is transferred to the radiators with a circulator (or in a boiler or other medium) to deliver a certain amount of heat, as the company καυστήρες Μπότης explain us.

It is then transferred back to the boiler to be heated again. Hot water is lighter than cold water and therefore tends to rise upwards, towards the radiators.

The installation that works in this way is called a natural circulation installation or a gravity installation .

Today we have a natural circulation installation almost only in solar water heaters.

We apply and use central heating installations with forced water circulation. Thus we avoid a series of studies for the implementation of which large piping sections and special constructions are required.

The use of circulators is required for the operation of the accelerated traffic heating installations.

The circulator is a centrifugal type pump that moves with the help of electricity. It transfers water from the boiler to the radiators and from there back to the boiler.

Main applications of circulators

Circulators are mainly used:

  • In heating systems with hot water
  • In closed industrial fluid circulation systems
  • In hot water recirculation
  • In autonomies of central heating installation

Circulation of circulators

Circulators, depending on the way they are lubricated, are divided into:

  1. Hydro-lubricants
  2. Oilseeds

Today, in central heating installations, we almost always use water-lubricating circulators.

Description

Each pump consists of the impeller where the impeller is, the electric motor that ensures the rotation of the impeller, the housing where the impeller moves and the electrical connection box.

In water-lubricating circulators, all rotating parts are wetted by the water circulating inside them.

The water lubricates and cools the circulator. The advantages of the hydraulic circulators are their quiet operation, their simple construction and they do not need maintenance.

Also due to the low resistance they do not create an obstacle to the natural circulation of water if they break down.

Thus the installation can operate with natural circulation until the circulator is repaired. The lubricating circulators operate with clean water.

Dirty water can damage the circulator (usually the impeller clogs and the electric motor is damaged).

Installation

The pump must be installed when all welding work is completed and after rinsing the installation. In an accessible location, for inspection or repair, if and when needed.

So that, in case of leaks, water does not drip on the electrical connection box. With its axis in a horizontal position because otherwise we will have air retention at the highest point, resulting in poor lubrication at this point.

So that the arrow in its shell, shows the same direction of flow of water from the boiler to the radiators. So that the box of electrical connections is not down because during its venting water can get into it.

It is necessary and must:

  • Valves should be installed before and after the circulator so that in a future necessary repair or replacement, we do not have to empty the entire installation.
  • Only insulate the pump housing and not the motor.
  • In installations with the expansion tank open and the pump placed in the supply, the safety (or expansion) pipe must be connected before the pump (between the pump and the boiler) and with the suction port as close as possible to the filling of the expansion tank.
  • In systems with a closed expansion tank, the tank must be located on the suction side of the pump.
  • Do not connect the connecting cable to the piping housing or motor of the pump.

General installation instructions

The circulator can be installed at any point of the installation as long as it is placed on the center line of either the water supply to the bodies or the center return line. However, it has been established to be placed inside the boiler room so that it can be controlled better.

The installation of the pump in the supply has the advantage that the whole installation is under pressure and the suction of air from possible points that are not watertight is excluded (eg Ventilators).

The pump is placed in the return pipe, only in heating installations where the water temperature can not be controlled such as e.g. fireplaces and wood boilers.

It can also be placed in the return pipe and in installations with open expansion vessels. It should not be placed too close to the chimney and in areas with an ambient temperature above 40 ° C as damage to the circulator electrical box may occur.

Circulators should never be fitted to horizontal piping, which then descends lower than the circulator, unless this horizontal pipe is automatically vented.

Otherwise, air is collected at this point which, not only does not allow the installation to work properly but can also damage the circulator.

If we have systems with thermostatic valves in the radiators or installations with autonomous valves then, a by-pass (branch, bypass) must be placed between the supply pipe and return with differential pressure valve.

In installations with plastic or copper pipes, it is advisable to fasten the circulator to a base with rubber supports, to avoid the transmission of vibrations to the pipes.

The connection of the circulators to the piping is done, depending on their size, with fittings or flanges.

At the connection of the pump it is good to place two pressure gauges, one before and one after it. In this way the overpressure created by its operation can be measured.

Also, a thermometer in the supply pipe and one in the return pipe will allow us to control the temperature difference between the supply and return water and thus properly adjust the circulator speeds, achieving a temperature difference of about 20 ° C.

In large installations, the installation of a water filter (which can be easily cleaned) in the pump suction provides great protection.

See more areas that Καυστήρες Μπότης serves:

Afterplay as an “antidote” to the sexual problem

We are talking with Athens Escorts about afterplay or “sexual closure”, as I like to say, as it is what fuels the next sexual encounter with warmth and passion, in the female erotic “brain” game.

“We had sex! We had a nice time! He gets up and goes inside… Why does he leave again immediately after sex? What can I do to keep him in our bed? I have asked him but I feel that he does not want to be with me after the sexual act,… as if he is avoiding me! ”

Yes, it is true that men’s “habits” are different from women’s “needs” I would say, since for a man it is a habit to get up almost immediately after intercourse and go to the refrigerator, to the toilet, to call a friend to end pending issues, social or work or even to get into the arms of Morpheus which is the most common, if the time is up!

On the contrary, the woman “needs” the hugging of her partner, his caresses, a few kisses. She wants to feel that it is important to him, that she gave him moments of desire and passion and that he recognizes it.

We are talking about afterplay or “sexual closure”, as I like to say, as it is what fuels the next sexual encounter with warmth and passion, in the female erotic “brain” game!

Foreplay, through the creativity and imagination of sexual partners, includes activities that stimulate the sexual disposition for intercourse. The contact itself, for most people, reflects the sexual pleasure or pleasure in sex. However, the time after contact (afterplay) is equally important. It is “the key to intimacy” and a successful next love affair.

How can the afterplay be upgraded? – Do’s

1. Stay for a while embraced, lost in your erotic silence or in your beautiful words and kisses, which may not be passionate but sweet and erotic.

2. Give each other a relaxing massage, caress gently.

3. Learn to enjoy through your senses: the touch, the look, the smell and the taste of the partner, can bring intense psycho-emotional satisfaction, and even lead to a second love affair.

4. Give each other time. It is proven that when the two partners do not forget that they are also lovers and spend time caressing each other after lovemaking, the intimacy and trust between them increases.

5. Talk about neutral issues. Do not remember the tax setting at that time, even if you paid for the phone!

6. Use this time to express sexual feelings, thoughts and desires that you have not shared.

7. Snack on something light, such as fruit, for example, drink a glass of wine together

8. Enjoy things together, such as a warm relaxing bath, immersed in the foam and their aroma, share a glass of wine, listening to your favorite music.

9. Remember situations that made you laugh and had a good time. The intimacy that develops in “sexual closure” can enhance the “emotional love aspects” and strengthen the bonds of your relationship.

10. Say “I love you!”

What to avoid? – the Don’ts

1. Do not complain or even worse – sexual complaints.

2. Do not talk about problems with your job, your finances or your children.

3. Do not run to wash

4. Do not turn on the TV

5. Do not start phones with friends or colleagues

6. Do not criticize, considering the other vulnerable at that moment

7. Do not compare your partner with an ex

Afterplay as an “antidote” to the sexual problem

Let us keep in mind that this time after contact is very important. Think – or are you? – a couple that the man, for example, usually finishes quickly. The woman stays next to him, unsatisfied once again. He gets up and goes inside, possibly disappointed and charged by his quick finish, which makes him feel “a little” towards the one who wants – but can’t – give her the pleasure of orgasmic climax! The result; After a while, she will start the “murmur”, she will charge him more and more angrily, making him feel even more “small and small”, while he will feel that he “uses her” and is only interested in himself. and his own sexual pleasure!

Let’s look at the script for a moment now, where he, yes, ends quickly, but he stays next to her, devotes time to her and why not, a few more foreplay, which may culminate in her as well. The consequent feeling of emptiness, embarrassment and dissatisfaction that follows a not so successful intercourse, can be reduced through the effective positive effect of “sexual closure”.

Yes, sex is not necessarily synonymous with male ejaculation, when the couple has learned to communicate and manage “together” in ways that offer both enjoyment and emotional intimacy. At the very least, their relationship is not ruined until they go to the specialist and deal with their sexual problem!

See more about ATHENS VIP ESCORTS SERVICES:

What is a domain name?

What is a domain name?

The domain name can be considered as your Internet address, where someone else can find you, but it is essentially our online identity. It is a name-address that has the form www.yourname.gr and refers us to a website (Website).

A domain name is a unique name for a website. For example, WEBUSE.gr is a domain name as well as microsoft.com. Domain names must be registered. When a domain name is registered, it is listed in a large domain name register.

Choosing a name is, like choosing a host, just as important as your Internet presence. Several factors play a role in choosing the right name:

  • if available
  • the size of the name
  • .gr or .com
  • if it sounds nice
  • if it contains any of the keywords we market

Tips (Mistakes we make in the domain name):

  • There are some words that in no way could be domain names. These words are considered inappropriate, because the buying public will not be able to subconsciously associate them with a brand.
  • In order for someone to remember a domain name, it must be something unique, which is registered in the consumer’s memory, so that the latter can look for it immediately after the first acquaintance with your brand.
  • Large domain names (A good domain name should be as short as possible.)
  • Conjunctions in domains (Conjunctions do not have a negative impact on SEO. However, very few people could actually remember typing the dash in the address bar.)
  • Ambiguity in domains (For example, if a company has a specific name and the domain name is something different, one may at first glance think that the website is something completely different from what it actually contains.)
  • Numbers in domains
  • Incorrect extension to domain names

How do I use domain names?

The use of domain names is done through the browser that everyone has installed on the computer but also through all applications / services that operate on the Internet. Well-known browsers are Chrome, Firefox, Opera, Safari and Internet Explorer. Each browser has a field (address bar) in which you can enter the domain name of the website you want to visit. All the necessary operations of assigning the domain name to IP are done automatically and almost immediately you see the website you requested.

What is the ending of a domain name?

Each domain name consists of two parts, the prefix (sld) and the suffix (tld). For example at example.com, the prefix is ​​example and the suffix is ​​.com. You can enter alphanumeric elements and dashes in the prefix. Other characters such as exclamation mark, party, etc., are not allowed. You can also get a domain name with Greek characters in the prefix.

If a domain name is considered common or a geographical term is assigned only to the respective local government organizations regardless of the way it is written in Latin characters. It is also not allowed to assign domain names that are keywords on the Internet.

How many characters can a domain name have?

The Variable Domain name ending in .gr or .el consists of two (2) to sixty three (63) characters. These specifications do not include the .gr or .el suffix and the second level shared domain name suffixes with .gr suffix.

For domain names ending in .gr or .el which consist of alphanumeric characters of the Greek alphabet, the number of sixty three characters refers to the length of the PUNYCODE form of the domain name, which is not identical with the number of characters of the domain name in Greek form of.

Is it possible to register a domain name with Greek characters and how?

Yes, it is possible to register domain names when their variable field consists of Greek characters. Declarations for the registration of domain name in Greek characters are submitted by the Registrars.

What are the basic rules for composing domain names with Greek characters?

  • Domain names with Greek and Latin characters at the same level are not supported
  • There is no difference between the Greek characters σ and ς e.g. μανοσ.gr and μανος.gr
  • There is no difference between lowercase or lowercase Greek characters and lowercase or lowercase Greek characters, e.g. eva.gr, eva.GR.

What forms of the name does the assignment of a domain name with Greek characters include?

Domain names ending in .gr or .el with Greek characters are assigned in the lower case form requested by the user in his application (i.e with tones, solvents, spirits, etc.) and the lower case form of the same name.

What is domain name registration?

Registration of a domain name is the process by which a free domain name (does not belong to someone else), is granted for use to a natural or legal person. By registering a domain name, the owner is granted the exclusive right to use the domain, for as long as the owner pays the registration fees. Domains are not registered for life, they are only reserved for a certain period of time, which can be renewed by their owners when the previous lease period ends.

How long does it take to assign a domain name?

The assignment of a domain name takes 2 years from the submission of the registration declaration in the Register. If it is a domain name that has been reserved for a specific entity (e.g homograph or with different punctuation marks) and has been activated after its declaration, the period of 2 years starts from the submission of the registration declaration (or the date of the last renewal of the interval assignment) of the domain name under which it was committed, and not from the date of its activation. It is noted that after the assignment of the domain name, you have the possibility of immediate renewal of the domain name for consecutive periods.

How many domain names can I request to be assigned?

There is no limit.

If the domain name assignment information I hold changes, do I have to declare it?

Any changes made to both the Name / First Name and the other data during the registration process of the domain name ending in .gr or .el must be notified to the Registrar and the Registry, within thirty (30) days from the change of the data. which are included in your statement. It is noted that non-compliance with the aforementioned obligation may lead to deactivation of the domain name and after a period of thirty (30) days, deletion of the domain name that has been granted to you.

How do I know if a domain name has been assigned?

Through the Domain Name Availability Search Application ending in .gr or .el (Web Whois) you can, by typing a domain name, find out if the specific name is available for assignment.

See more services about web hosting: